Table of Contents
Advertisement
Connecting an amplifier equipped with an
MPEG audio decoder
MPEG2 sound
You can enjoy motion picture and live concert DVD video discs
encoded via the MPEG2 recording system with dynamic realistic sound
by connecting an amplifier equipped with an MPEG2 audio decoder or
MPEG2 audio processor.
TV/DVD back panel
To OPTICAL
DIGITAL AUDIO OUT
Connecting an amplifier equipped with a
digital audio input
2 channel digital stereo
You can enjoy the dynamic sound of 2 channel digital stereo by
connecting an amplifier equipped with a digital audio input and speaker
system (right and left front speakers).
TV/DVD back panel
To OPTICAL
DIGITAL AUDIO OUT
Amplifier equipped with a
MPEG2 audio decoder
To OPTICAL
type digital
audio input
Amplifier equipped with a
Digital audio input
To OPTICAL
type digital
audio input
You will need:
• one optical cable
Notes:
• Connect the OPTICAL jack of the TV/DVD
to the "OPTICAL" input of a Receiver or
Processor.
• Refer to the owner's manual of the
connected equipment as well.
• The output sound of the TV/DVD has a wide
dynamic range. Be sure to adjust the
receiver's volume to a moderate listening
level. Otherwise, the speakers may be
damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or
disconnect the TV/DVD's power cord. If you
leave the amplifier power on, the speakers
may be damaged.
You will need:
• one optical cable
Notes:
• PCM audio is limited to DVD or CD
playback.
• Connect the OPTICAL jack of the TV/DVD
to the "OPTICAL" input of a Receiver or
Processor.
• Refer to the owner's manual of the
connected equipment as well.
• The output sound of the TV/DVD has a wide
dynamic range. Be sure to adjust the
receiver's volume to a moderate listening
level. Otherwise, the speakers may be
damaged by a sudden high volume sound.
• Turn off the amplifier's before you connect
or disconnect the TV/DVD's power cord. If
you leave the amplifier power on, the
speakers may be damaged.
19
Advertisement
Table of Contents
