Using Channel Return; Using Surflock - Toshiba 46WX800 Owner's Manual

Elements of the Channel Browser
1 2
History
88 Video HDMI 1
VCR DVD
6
Current list (History, ANT/CABLE, Inputs, or
1
REGZA-LINK)
2 Input type
3 Channel or input currently being viewed
4 Channel or input that is currently highlighted in the
browser
5 Channels stored in the History List
6 Inputs or channels labels
To toggle among the available lists:
1
Open the Channel Browser
2
Press B or b.
Note:
• The History List opens by default. After selecting
another list, the Channel Browser
selected list.
To tune to a channel or input in Browse mode:
1
Highlight an item. The TV tunes to the channel or
input.
Press O to close the Channel Browser
2
To tune to a channel or input in Select mode:
1
Highlight the item you want to be tuned.
2
Press .
O K
Press O to close the Channel Browser
3
Chapter 6: Basic features
™
3 4
11 3 8
™ .
™
will open in the last
™ .
™
.
Adding and clearing channels and inputs in the
History List
Adding channels to the History List:
As a channel or input is tuned, the Channel Browser
adds it to the History List and displays it on the right
side of the Channel Browser
Previously tuned channels and inputs shift to the left.
Press C to surf back through the previously tuned
channels and inputs.
™
The Channel Browser stores these channels:
•Channels that are tuned using the numeric buttons on
the remote control.
•Channels that are tuned for at least 5 seconds using <
or ,.
To clear channels from the History List:
•Reconfigure the ANT/CABLE input.
•Turn off the TV.

Using Channel Return

You can switch between two channels without entering
a channel number each time. This feature also works for
external inputs.
1
Select the first channel you want to view.
2
Select a second channel using the Channel Number
buttons (and the dash (=) button if needed).
3
Each time you press
forth between the last two channels that were
tuned.

Using SurfLock

™
The SurfLock ™ feature temporarily memorizes one
channel to the button, so you can return to it
quickly, but one time only, from any other channel with
. This feature also works for external inputs.
To memorize a channel to the
1
Tune the channel you want to program into the
button.
2
Press and hold for about 2 seconds until the
message "Memorized" appears. The channel has
been programmed to the
3
You can then change channels repeatedly, and
when you press , the memorized channel will
be tuned.
After pressing and then changing channels again,
the memory is cleared and the button functions as
Channel Return.
™
™ .
, the TV switches back and
button:
button.
37