Table of Contents
Advertisement
SETUP & OPERATION MANUAL
FEATURES
Totally enclosed, fan cooled, permanently
lubricated motor.
Heavy-duty design with a continuous duty
rating, for industrial applications.
Heavy-duty base with eight swivel casters
for smooth movement around the shop.
Magnetic safety switch.
Equipped with heavy-duty collection bags
made from extra thick, transparent, recycla-
ble plastic and 2 micron filter bags to trap
fine sawdust. (Not included on "CF" canister
filter model)
Extremely durable heavy-duty steel impeller.
Quick-release bag clamps for fast and easy
bag changes.
SPECIFICATIONS
INLET DIAMETERS
1 x 9" (228 mm)
4 x 4" (102 mm)
AIRFLOW CAPACITY
3980 CFM
BLOWER WHEEL
13" (330 mm)
SOUND RATING
93 dB
BAG DIAMETER
24" (610 mm)
BAG CAPACITY
144 GAL (655 L)
STATIC PRESSURE
18 1/2" OF WATER
OVERALL DIMENSIONS (L x W x H)
77" x 26" x 104"
(1956 x 660 x 2642 mm) #10-510
77" x 26" x 94"
(1956 x 660 x 2388 mm) #10-510CF
MOTOR
M1 : 5 HP, 220 V, 1 Ph, 34 A
M2 : 5 HP, 220 V, 3 Ph, 15 A
M3 : 5 HP, 600 V, 3 Ph, 6 A
WEIGHT
370 LBS (168 kg)
5 HP DUST COLLECTOR
MODEL
# 10-510 M1
#10-510CF M1
VERSION 2_REVISION 1 - January 2015
© Copyright General® International
Advertisement
Table of Contents
Related Manuals for General International 10-510 M1
Summary of Contents for General International 10-510 M1
-
Page 1: Specifications
93 dB MODEL BAG DIAMETER 24” (610 mm) BAG CAPACITY 144 GAL (655 L) # 10-510 M1 STATIC PRESSURE 18 1/2” OF WATER #10-510CF M1 OVERALL DIMENSIONS (L x W x H) 77” x 26” x 104” (1956 x 660 x 2642 mm) #10-510 77”... - Page 2 THANK YOU for choosing this General ® International model 10-510/510CF dust collector. This dust collector has been carefully tested and inspected before shipment and if properly used and maintained, will provide you with years of reliable service. To ensure optimum performance and trouble-free operation, and to get the most from your investment, please take the time to read this manual before assembling, installing and operating the unit.
-
Page 3: Rules For Safe Operation
Rules for Safe Operation To help ensure safe operation, please take a moment to learn the machine’s applications and limita- tions, as well as potential hazards. General® International disclaims any real or implied warranty and holds itself harmless for any injury that may result from improper use of its equipment. 1. -
Page 4: Electrical Requirements
IN THE EVENT OF AN ELECTRICAL MALFUNCTION OR source whenever maintenance, adjustments, or servic- SHORT CIRCUIT, grounding reduces the risk of electric ing is required.220 V Single-Phase 10-510 M1 & 10-510CF shock. This tool is equipped with a power cord that has M1 operate on power only. - Page 5 5 HP DUST COLLECTOR 10-510 IDENTIFICATION OF MAIN PARTS AND COMPONENTS 10-510 A. MIDDLE BASE PLATE H. BAG HANGER B. SIDE BASE PLATE I. COLLECTOR BAG C. LEG J. FILTER BAG D. COLLECTOR BODY W/FAN & MOTOR ASSEMBLY K. HOSE INLET (4-HOLE MANIFOLD) E.
- Page 6 5 HP DUST COLLECTOR 10-510CF IDENTIFICATION OF MAIN PARTS AND COMPONENTS 10-510CF A. MIDDLE BASE PLATE G. FILTER CLEANING HANDLE B. SIDE BASE PLATE H. BELT CLAMP C. LEG I. COLLECTOR BAG D. COLLECTOR BODY W/FAN & MOTOR J. CANISTER FILTER ASSEMBLY K.
- Page 7 UNPACKING AND PREPARATION FOR SET-UP & ASSEMBLY SAFETY ADDITIONAL REQUIREMENTS FOR SET-UP & ASSEMBLY Use caution and wear gloves when handling metal parts such as the belt clamps, which can cut if handled carelessly. The model 10-510 is a heavy machine (370 Lbs. shipping weight - 168 kg.) Do not overexert.
- Page 8 SHOP PLACEMENT / SPACE CONSIDERATIONS Because each shop situation is unique, the following factors should be taken into consideration when determining and before deciding on the ideal installation to best suit your shop dust collection needs. The unit should be installed as close to the dust source(s) as possible. The base of the unit is mounted on casters and as such the dust collector can be moved from one location to another within the shop if a permanent installation location is not practical or desired.
-
Page 9: Assembly Instructions
ASSEMBLY INSTRUCTIONS INSTALLING THE CASTERS: 2. Attach the casters using (4) 5/16” x 1/2” flange bolts 1. Turn the 3 base plates (middle, right and left) up- per caster. side down. JOINING THE BASE PLATES TOGETHER: 2. Screw 2 bolts in the top and one in the front and 1. - Page 10 INSTALLING THE FAN/MOTOR ASSEMBLY ONTO THE BASE: 1. Connect the legs from collector body with fan Tip/Hint: Have 2 people turn the collector body right & motor assembly to the base using 8 x 5/16” x side up (See Fig. 12) and support the weight while the 1/2”...
- Page 11 ASSEMBLE AND ATTACH THE UPPER BAG SUPPORT ROD: (MODEL 10-510 ONLY) bag hanger upper bag support rod Mount the assembled bag hanger onto the metal rod Connect the upper bag support rod to the bag located at the top of the collector body and attach it hanger with the 1/4”...
-
Page 12: Operating Instructions
FIT THE CANISTER FILTERS TO THE DRUMS : INSTALL THE HOSE INLET: (MODEL 10-510CF ONLY) 1. Fit the canister filters onto the top opening on the Fit the hose inlet (4-hole manifold) over the main air drums, A. inlet, and secure it in place using the 3/16” X 3/8” metal screw. - Page 13 BASIC INSTRUCTIONS The MODEL 10-510 & 10-510CF Dust Collector has been designed to capture remove and collect non-metallic dust and wood dust around the workshop and from woodworking machinery. This machine is designed for a con- tinuous duty rating for industrial applications. ON/OFF SWITCH The unit is supplied with a MAGNETIC SAFETY SWITCH designed to protect the unit and the user from power...
- Page 14 • All bearings are sealed and permanently lubricated. No further lubrication is needed. • Periodically inspect all hardware, fittings and fasteners that may have loosened due to vibration - re-tighten as needed. • To minimize airborne dust particles periodically inspect all dust collection fittings - re-tighten as needed. •...
- Page 15 CLEANING OR REPLACING THE CANISTER FILTERS (MODEL 10-510CF) Turn the switch to the “OFF” position and unplug the unit from the power source before cleaning or replacing canister filters or before performing any maintenance. After a period of time depending on the frequency of use, the canister filter may become clogged and affect air- flow as well the overall efficiency of the unit.
- Page 16 RECOMMENDED OPTIONAL ACCESSORIES FOR YOUR DUST COLLECTOR We offer a large variety of products to help you increase productivity, accuracy and safety when using your dust collector. Here’s a small sampling of accessories available from your local General International dealer. CANISTER FILTER 4”...
- Page 17 Model #10-510...
- Page 18 PARTS LIST 10-510/510CF PART N0. DESCRIPTION SPECIFICATION 10510-01 CASTER 3” 10510-02 FLANGE BOLT 5/16” X 1/2” 10510-03 MIDDLE BASE PLATE 10510-04 SIDE BASE PLATE 10510-05 RIGHT LEG 10510-06 LEFT LEG 10510-07 HOUSING 10510-08 CAP SCREW M6 X 20MM 10510-09 HEX. HD. BOLT 3/8”...
- Page 19 Canister supplied on Model #10-510CF PARTS LIST 10-516C PART # DESCRIPTION SPEC. PART # DESCRIPTION SPEC. 10516C-36 BOTTOM FIXING PLATE 10516C-25 CANISTER FILTER DIA. 600MM 10516C-37 FIXING PLATE 10516C-26 5/16” 10516C-27 SET SCREW 5X12”X3/4” 10516C-38 PHILLIPS HEAD SCREW M5X15 10516C-28 HANDLE 10516C-39 FOAM GASKET...
- Page 20 Models 10-510 M1 & 10-510CF M1 8360 Champ-d’Eau, Montreal (Quebec) Canada H1P 1Y3 Tel.: (514) 326-1161 Fax: (514) 326-5565 - Fax: (514) 326-5555 - Parts & Service / Order Desk orderdesk@general.ca www.general.ca IMPORTANT When ordering replacement parts, always give the model number, serial number of the machine and...
Need help?
Do you have a question about the 10-510 M1 and is the answer not in the manual?
Questions and answers