Using The Pc Settings Feature; Setting The Pc Audio - Toshiba Regza 40RF350U Owner's Manual

Using the PC settings feature

You can view an image from a PC on the TV screen.
When a PC is connected to the TV's PC IN terminal, you can
use the PC Settings feature to make adjustments to the image.
If the edges of the picture are cut off, readjust the Horizontal
Position and Vertical Position. If the picture is affected by
interference, readjust the Clock Phase and Sampling
Clock.
To adjust the PC settings:
Repeatedly press + to select PC input mode
1
(- "Selecting the video input source to view" page 46).
Press Y and open the Setup menu.
2
Highlight PC Settings and press T.
3
Setup
Installation
CE-Link Setup
Sleep Timer
HDMI Settings
PC Settings
Blue LED Illumination
Power-On Mode Power-Saving
Note: If a PC is not connected or there is no PC input
signal, this feature will be grayed out in the Setup menu.
4
Press B or b to highlight the item you want to adjust.
5
Press C or c to make the appropriate adjustments.
PC Settings
Horizontal Position
Vertical Position
Clock Phase
Sampling Clock
Reset
Note: The screen is disrupted momentarily when
adjusting the PC settings. This is not a sign of malfunction.
Horizontal Position:
•
Moves the picture left/right.
The adjustment range is within ±10 from center.*
Vertical Position:
•
Moves the picture up/down.
The adjustment range is within ±10 from center.*
Clock Phase:
•
Helps to reduce noise and sharpen the picture.
The adjustment range is within ±4 from center.*
Sampling Clock:
•
Helps to reduce noise and minimize periodic vertical stripes
on the screen.
The adjustment range is within ±5 from center.*
* The default settings and adjustable ranges may vary depending on
the input signal format.
Chapter 6: Using the TV's features
High
0
0
0
0
Done

Setting the PC Audio

This function allows you to output or mute the sound from
your PC when connecting using the PC IN terminal and an
analog RGB cable. (- page 22)
To set the PC Audio:
Press Y and open the Audio menu.
1
Highlight Audio Setup and press T.
2
3
Press B or b to select PC Audio and then press C or c
to select No or Yes.
Yes: Outputs the sound from your PC.
No: Mutes the sound from your PC, and outputs the
sound from the HDMI-1 (DVI) connection.
Audio Setup
PC Audio
HDMI 1 Audio
MTS
Language
Optical Output Format
Dolby Digital
Dynamic Range Control
Reset
Note: Because the PC and HDMI-1 inputs share the same
set of analog audio inputs, the PC Audio menu setting
influences the HDMI 1 Audio menu setting. If PC Audio is
set to "No," the HDMI 1 Audio setting changes to "Auto."
If PC Audio is set to "Yes," the HDMI 1 Audio setting is
set to "Digital" and is grayed out in the menu. (Also see
item 5 on page 12 and "Setting the HDMI
on page 43.)
No
Auto
Stereo
English
Dolby Digital
Compressed
Done
™ Audio mode"
65