Stereo/ Bilingual Selection - Toshiba 29CZ6DA Owner's Manual

PICTURE AND SOUND ADJUSTMENT (continued)
Press CH s /t to select the
desired band and then press ;
-/+ to adjust the level.
MTS MODE (Multi-channel TV Sound)
Only available for 29CZ5DE/29CZ6DA model
The TV receives both stereo and bilingual
broadcasts transmitted in either the NICAM
or German stereo/bilingual broadcast system.
Press ; -/+ to select "AUTO" or "MONO".
AUTO The "AUTO" setting of the
MTS mode automatically
recognize stereo/bilingual
programs depending on the
broadcast signal.
MONO If you experience noise or poor
reception of any stereo/
bilingual program, set the MTS
MODE to "MONO". Noise will
be reduced and reception may
improve.
INTELLIGENT SOUND
The Intelligent sound mode
equipped with Automatic
Volume Levelling (AVL) and
Extended Spatial Stereo (ESS)
feature. It stabilize the volume
to
loudness occured. And also
provides user an experience of
expanded stereo image by
widening stereo sound effects.
Press ; -/+ to set "ON" or
"OFF".
Notes
• Any adjustment of the BASS, TREBLE or
EQUALIZER settings will be stored in the
MEMORY mode.
• If you adjust any one of items: BASS, TREBLE
or EQUALIZER in the THEATER or NEWS
modes, the TV will automatically change to
the MEMORY mode.
• When the volume is set above 80, it is not
recommended to adjust the bass, treble or
equalizer to a high value.
EN-01-20[29CZ5DE/29CZ6DA/TES]-1
prevent any sudden
11

Stereo/ Bilingual selection

(Only available for 29CZ5DE/29CZ6DA model)
To select the stereo programs
1 When a stereo program is received, M
appears on the screen.
2 Press mI/II to select the stereo/monaural
mode. M and U appear cyclically on
the screen.
Display Reception mode
Stereo
M
Monarual
U
Note
If you experience noise with a particular
program on whose channel reception is usually
good, try setting MTS MODE to AUTO, then
switch the mI/II button to U (monaural).
To select the bilingual programs
1 When a bilingual program is received, I/II
appears on the screen.
2 Press mI/II to select the sound to be
heard. The sound differs according to the
transmission system: NICAM or German
stereo/bilingual broadcast. I, II and U
appear cyclically on the screen.
Sound to be heard
Display
NICAM
Sub I sound
I
II Sub II sound
Main sound
U
23/9/05, 9:27 AM
German stereo/
bilingual broadcast
Main sound
Sub sound
Main sound
11