Getting Started - Toshiba 29CZ6DA Owner's Manual

GETTING STARTED

1 Connect the antenna to
rear of the TV.
VHF
Outdoor
75-ohm coaxial cable
antenna
Mixer
300-ohm twin-lead feeder with
optional antenna adapter
2
Connect the power cord to an
electrical outlet with standard
household power within the range
of ~110-240V, 50/60Hz.
Notes
• Do not connect the power cord until all
your equipments have been connected.
• The antenna cables should not be
bundled with the power cord and the like.
3
Insert the batteries into the remote
control.
Requires two R03
(AAA) batteries
• If the remote control does not operate
correctly, if the operating range becomes
reduced, replace both batteries with
new ones.
• When the remote control will not used for
a long period of time or when the batteries
are worn out, remove the batteries to
prevent leakage.
• Do not drop, dampen or disassemble the
remote control.
Cautions
• Do not dispose batteries into fire. Dispose
batteries into the designated disposal areas
according to the local regulations.
• Do not mix battery types or combine used
batteries with new ones.
EN-01-20[29CZ5DE/29CZ6DA/TES]-1
at the
UHF
or
Operating range
5m
Remote sensor
5
4
Push the (Power switch) until it
clicks to turn on the power.
Refer to page 8 for details on power on and off.
5
Preset the channels automatically
(ASM function).
Use remote control for this operation. The
buttons on the TV with similar name may also
be use.
1 Select the starting position for channel
to be preset. Press the Number buttons
(-/--, 0~9) or CH s/t.
2 Set the correct broadcast system for
your region. Press MENU and then ; -/+
to highlight the " SET UP" icon.
Confirm "COLOR MODE" is set to "AUTO"
and "SOUND MODE" is set to proper
system. (Refer to the table on page 9.) If
not, press CH s/t to select "COLOR
MODE" or "SOUND MODE, press ; -/+
and then CH s/t to set each proper
system.
3 Press MENU and then ; -/+ to highlight
the " TUNING" icon. Select "ASM",
then press ; + to start the search. When
the TV screen returns to the start position,
the procedure is complete.
CH
CH
6 Press to adjust the sound
; -/+
volume.
23/9/05, 9:26 AM
1
SETUP
LANGUAGE ENGLISH
COLOR MODE AUTO
SOUND MODE B/G
OFF
SKIP
BLUE SCREEN ON
TEXT FAST
SELECT / MENU –/+ BACK
MENU
TUNING
MFT
AFT OFF
ASM
SEARCH
POSITION P001
MEMORY
SELECT / ADJUST –/+ BACK
MENU
5