Introduction - DEEP SEA ELECTRONICS DSEM840 Operator's Manual

Introduction

1 INTRODUCTION
This document details the operation and setup requirements of the DSEM840 Mobile Controller and
®
Display, part of the DSEControl range of products.
The manual forms part of the product and should be kept for the entire life of the product. If the
product is passed or supplied to another party, ensure that this document is passed to them for
reference purposes.
This is not a controlled document. DSE do not automatically inform on updates. Any future updates of
this document are included on the DSE website at www.deepseaplc.com
Observe the operating instructions. Non-observance of the instructions, operation not in accordance
with use as prescribed below, wrong installation or incorrect handling seriously affects the safety of
operators and machinery.
A robust metal case designed for chassis mounting houses the module. Connections are via locking
plug and sockets.
The controller is supplied with no application program. The equipment manufacturer is responsible for
creating and managing the application program and installing it in the controller. This is achieved
using CODESYS V3.5 or C programming. Contact DSE Technical Support for further details.
Page 5 of 50 057-246 ISSUE: 1