Viewing The Digital Signal Meter; Viewing The System Status - Toshiba Regza 26HL67 Owner's Manual

Viewing the digital signal meter

You can view the digital signal meter in the ANT digital TV
input source only.
To view the digital signal meter:
1
Press Y and open the Setup menu.
2
Highlight Installation and press T.
3
A new set of Installation menu icons will appear, as shown
below. Open the Terrestrial menu, highlight Signal
Meter, and press T.
Installation
Terrestrial
4
Press BbC c to select the antenna input and digital
channel whose signal you want to check.
Note: The physical digital channel number listed in the
Signal Meter screen may not correspond to a virtual TV
channel number. Contact your local broadcasters to
obtain the RF channel numbers for your local digital
stations.
Signal Meter
Signal Locked
Physical Digital Channel
Virtual Digital Channel
Advanced
To close the screen and return to the Terrestrial
menu:
Highlight Done and press T.
To return to normal viewing:
Press O.
Chapter 5: Setting up your TV
Input Configuration
Channel Program
Channel Add/Delete
Signal Meter
0
Peak 0
4
4-1
Done

Viewing the system status

To view the system status:
1
Press Y and open the Setup menu.
2
Highlight Installation and press T.
3
A new set of Installation menu icons will appear, as shown
below. Open the System Status menu, highlight
System Information, and press T.
Installation
System Status
4
Press C c to scroll through the menu bar to select the
Software Version and view the related information.
System Information
Software Version
Nov 17 2006 - 01:52:20
To close the screen and return to the Installation
menu:
Highlight Done and press T.
To return to normal viewing:
Press O.
Reset Factory Defaults
To reset all settings and channels to their factory
default values:
1
Press Y and open the Setup menu.
2
Highlight Installation and press T. A new set of
Installation menu icons will appear.
3
Open the System Status menu, highlight System
Information, and press T.
4
Press C c to scroll through the menu bar to select
Factory Defaults.
System Information
Factory Defaults
This window provides the ability to reset the TV
settings.Type in your PIN now (or "0000" if no
PIN has been set) to restore settings to their
factory default values.
5
Enter your PIN code (or 0000 if no PIN code has been set).
System Information
HL07
3.2.21.0
FW: 0B
Done
Done
(continued)
33