Scrolling The Theaterwide ® Picture (Theaterwide 2 And 3 Only); Using The Auto Aspect Ratio Feature; Selecting The Cinema Mode; Using The Freeze Feature - Toshiba 26AV502U Owner's Manual

Scrolling the TheaterWide
(TheaterWide 2 and 3 only)
You can set separate scroll settings for the TheaterWide 2 and
TheaterWide 3 modes for each input.
To set the scroll settings:
1
Press and open the Video menu.

Highlight Theater Settings and press

In the Picture Size field, select either TheaterWide  or
TheaterWide  (you cannot scroll in any other mode).

to highlight the Picture Scroll field.
Press
q

Press or to scroll the picture up and down as needed,
t u
from –10 to +20.
6
To save the new settings, highlight Done and press
To revert to the factory defaults, highlight Reset and press
.

Using the auto aspect ratio feature

When the auto aspect ratio feature is set to On, the TV
will automatically select the picture size when one of the
following input sources is received:
A 480i, 480p, 720p, 1080i digital signal from the ANT/CABLE
•
input
A 480i signal from the VIDEO 1 or VIDEO  input
•
A 480i signal from the ColorStream HD1, or HD input
•
A 480i, 480p, 720p, 1080i, or VGA (60Hz) signal from the
•
HDMI 1/ input
Aspect ratio of Automatic aspect size (automatically
signal source selected when Auto Aspect is On)
4:3 normal Natural (with sidebars)
4:3 letter box TheaterWide 2
16:9 full Full
Not defined
(no ID-1 data The current picture size you set under
or HDMI "Selecting the picture size" on page 39.
aspect data)
Note: The auto aspect ratio feature is not applicable to PC
input.
0
Chapter 6: Using the TV's features
To turn on the auto aspect ratio feature:
®
picture
1
Press

Highlight Theater Settings and press

In the Auto Aspect Ratio field, select On.

To save the new settings, highlight Done and press
To revert to the factory defaults, highlight Reset and
press
To turn off the auto aspect ratio feature:
.
Select Off in step 3 above.

Selecting the cinema mode

When you view a DVD (3:2 pulldown processed) from a DVD
player connected to the VIDEO 1, VIDEO , ColorStream HD-1,
ColorStream HD- (component video), or HDMI inputs on the
TV, smoother motion can be obtained by setting the Cinema
Mode to Film.
To set the Cinema Mode to Film:
(available for 480i and 1080i signals)
1
Press

.
Highlight Theater Settings and press

In the Cinema Mode field, select Film.

To save the new settings, highlight Done and press
To revert to the factory defaults, highlight Reset and
press
To set the Cinema Mode to Video:
Select Video in step 3 above.

Using the FREEZE feature

To use the FREEZE feature:
1
When viewing the TV, press
still picture.

To return to the moving picture, press
other button).
Note: If the TV is left in FREEZE mode for more than 15
minutes, the FREEZE mode will automatically be released
and the TV will return to moving picture.
Using the FREEZE function for any purpose other than your
private viewing may be prohibited under the Copyright
Laws of the United States and other countries, and may
subject you to civil and criminal liability.
and open the Video menu.
.
and open the Video menu.
.
to make the picture a
.
.
.
.
again (or any