Channel tuning problems
Make sure the remote control is set to the correct device
•
mode ( page 21).
The channel may have been erased from the channel
•
memory by the Channel Add/Delete feature. Add the
channel to the channel memory ( page 30).
The channel may be blocked by the Channels Block
•
feature. Unblock the channel ( page 49).
If you are unable to tune digital channels, check the
•
antenna configuration ( page 29). If you are still
unable to tune digital channels, clear all channels from
the channel list ( page 31) and reprogram channels
into the channel memory ( page 30). If you are still
unable to tune digital channels, use the Reset Factory
Defaults procedure ( page 33). Also see "TV stops
responding to controls" and "Other problems"
( page 53).
Closed caption problems
•
If the program or video you selected is not closed-
captioned, no captions will display ( page 42).
If text is not available, a black rectangle may appear. If
•
this happens, turn off the closed caption feature
( page 42).
A closed-caption signal may not display correctly in
•
the following situations: a) when a videotape has been
dubbed; b) when the signal reception is weak; or c) when
the signal reception is nonstandard ( page 42).
Rating blocking (V-Chip) problems
•
If you forget your PIN code: While the PIN code
entering screen is displayed, press
within 5 seconds. The PIN code you previously stored
will be cleared ( page 45).
HDMI problems
For HDMI cables
Make sure to use cables with the HDMI Logo
•
(
) ( page 17).
For Legacy HDMI source
Some legacy HDMI sources may not work properly
•
with the latest HDMI TV products, due to new standard
adoption.
Chapter 8: Troubleshooting
four times