Scrolling The Theaterwide@ Picture (Theaterwide 2 And 3 Only); Using The Auto Aspect Ratio Feature - Toshiba 46RV525RZ Owner's Manual

Native
(for 48Di (HDMI), 48Dp (HDMI), 72Dp,
1D8Di, and 1D8Dp signal programs)
P(TCl~IO
001
tLo..ij
000
• If receiving a 4S0i (HDMl), 4S0p (HDMI), nop,
I 080i,
or
IOSOp signal program, Native mode scales
the video to display the entire picture within the
borders of the screen (i.e. no overscanning).
• This is especially useful for external HD sources
such as DV HS movies,
or PC graphics.
Note:
• This mode
is supported only for HOMI
(1080p,1080i, 720p, 480p, and 480i), ColorStream
(1080i and 720p), and ANTI CABLE (digital)
inputs (1080p, 1080i, and 720p).
• Depending on the input signals, the border of
the picture may be hidden, displayed in black,
or noisy
Dot by Dot
(for VGA, SVGA, XGA, WXGA, and
SXGA sources only)
The "Dot by Dot" picture is non-scaling display.
Depending on the input signal formats, picture is
displayed with sidebars and/or bars at the top and
bottom. (Example: VGA input source)
To set the scroll settings:
1
MENU .
Press
0
and open the
Video
menu.
2
Highlight
Theater Settings
and press
8.
3
In the
Picture Size
field, select either
TheaterWide
2
or
TheaterWide 3
(you cannot scroll in any other
mode).
4
Press
T
to highlight the
Picture Scroll
field.
5
Press ..... or
~
to scroll the picture up and down
as needed.
6
To save the new settings, highlight
Done
and
press
8.
To revert to the factory defaults,
highlight
Reset
and press
8.
Note: When receiving a signal at 480i
resolution, the picture scroll function may have
limited adjustment range.
Using the auto aspect ratio feature
When the auto aspect ratio feature is set to
On,
the
TV will automatically select the picture size when
one of the following input sources is received:
• A 4S0i, 480p, 720p, I080i digital signal from the
ANT/CABLE
input
• A 4S0i signal from the
VIDEO 1
or
VIDEO 2
input
• A 480i signal from the
ColorStream HD1,
or
HD2
input
• A 480i, 480p, 720p, I080i, I080p, or VGA (60Hz)
signal from the
HDMI1/2
input
*
To view the hidden areas (such as subtitles or
captions), see below "Scrolling the TheaterWide®
picture".
4:3 normal
4:3 letter box
16:9 full
Natural (with sidebars)
TheaterWide
2
Full
Scrolling the TheaterWide® picture
(TheaterWide 2 and 3 only)
You can set separate scroll settings for the TheaterWide 2
and TheaterWide 3 modes for each input.
I
40
Not defined (no The current picture size you
ID-I data or set under "Selecting the
HDMI aspect data) picture size" on page 38.
Note: The auto aspect ratio feature is not
applicable to PC input.