Maintenance And Service - Bosch GCM 8 SJ Professional Manual

OBJ_BUCH-1168-001.book Page 48 Friday, April 16, 2010 5:25 PM
48 | English
Transport (see figure V)
Before transporting the power tool, the follow-
ing steps must be carried out:
– Loosen the locking screw 25 if tightened.
Pull the tool arm completely to the front and
tighten the locking screw again.
– Screw the depth stop 23 all the way up or
turn the depth stop lever 47 in clockwise di-
rection back to the stop.
– Bring the machine into the transport posi-
tion.
– Remove all accessories that cannot be
mounted firmly to the power tool.
If possible, place unused saw blades in an
enclosed container for transport.
– Carry the machine by the transport handle 2
or hold it by the recessed grips 59 on the
sides of the saw table.
When transporting the power tool, use only
the transport devices and never use the
protective devices.

Maintenance and Service

Maintenance and Cleaning
Before any work on the machine itself, pull
the mains plug.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts order,
please always include the 10-digit article
number given on the type plate of the machine.
Cleaning
For safe and proper working, always keep the
power tool and its ventilation slots clean.
The retracting blade guard must always be able
to move freely and retract automatically. There-
fore, always keep the area around the retracting
blade guard clean.
1 609 929 W28 | (16/4/10)
Remove dust and chips after each working pro-
cedure by blowing out with compressed air or
with a brush.
Clean the roller 7 and the lighting and laser unit
(45, 46) regularly.
Accessories
Dust bag. . . . . . . . . . . . . . . . . . . 2 605 411 222
Material clamp . . . . . . . . . . . . . . 2 608 040 205
Extension bars . . . . . . . . . . . . . . 2 607 001 978
Insert plates . . . . . . . . . . . . . . . . 2 607 001 966
Saw blades for wood and plate materials, pan-
els and strips/mouldings
Saw blade 216 x 30 mm,
48 teeth . . . . . . . . . . . . . . . . . . . 2 608 640 641
Saw blades for hardwood and composite mate-
rials
Saw blade 216 x 30 mm,
60 teeth . . . . . . . . . . . . . . . . . . . 2 608 640 446
Saw blades for plastic and non-ferrous metals
Saw blade 216 x 30 mm,
80 teeth . . . . . . . . . . . . . . . . . . . 2 608 640 447
After-sales Service and Customer
Assistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
www.bosch-pt.com
Our customer service representatives can an-
swer your questions concerning possible appli-
cations and adjustment of products and acces-
sories.
Bosch Power Tools