Laser Devices; Scanner Labeling - PSC QRG QuickScan QS3500 Manual

Q u
• IEC 1000-4-11:1994; Electromagnetic
compatibility (EMC), Part 4: Testing and
measurement techniques; Section 11:
Voltage Dips, Short Interruptions, and
Voltage Variations.
• EN 60 950 + A1+A2+A3+A4+A11 - Safety
of Information Technology Equipment
Including Electrical Business Equipment
• EN 60 825-1 (EN 60 825) - Safety of
Devices Containing Lasers

Laser Devices

PSC Inc. products using lasers comply with US
21CFR1040.10, and IEC825-1:1993, EN60825-
1:1994+A11:1996. The laser classification is
marked on one of the labels on the product.
Class 1 Laser devices are not considered to be
hazardous when used for their intended purpose.
The following statement is required to comply with
US and international regulations:
Caution: Use of controls, adjustments or
performance of procedures other than those
specified herein may result in hazardous laser light
exposure.
Class 2 laser scanners use a low power, visible light
diode. As with any very bright light source, such as
the sun, the user should avoid staring directly into
the light beam. Momentary exposure to a Class 2
laser is not known to be harmful.

Scanner Labeling

i c k
For Class 1 Laser Products:
DANGER - LASER LIGHT WHEN OPEN. AVOID DIRECT EYE EXPOSURE.
ATTENTION -LUMIÈRE LASER EN CAS D'OUVERTURE. EXPOSITION DANGEREUSE AU FAISCEAU .
VORSICHT - LASERLICHT, WENN ABDECKUNG GÖEFFNET. NICHT DEM STRAHL AUSSETZEN
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPARIEL À LASER DE CLASSE 1
IEC825-1:1993. EN60825-1:1994+A11:1996
For Class 2 Laser Products:
STARE INTO BEAM. IEC CLASS 2 LASER PRODUCT 630-680 nM, 1.0 mW LASER
S c
PSC INC.
EUGENE, OR
LASERLICHT - NICHT IN DEN STRAHL BLICKEN. LASER KLASSE 2
LUMIERE LASE-NE PAS REGARDER DANS LE FAISCEAU
APPAREIL A LASER DE CLASSE 2. CAUTION-LASER LIGHT. DO NOT
C A U T I O N
LASER LIGHT -DO NOT
STARE INTO
630-680nM LASER
1.0 mW MAX OUTPUT
CLASS II LASER PRODUCT
PSC INC.
EUGENE, OR
46
a n
BEAM