Before First Use - Westfalia SMARTWORKS 880412 Original Instructions Manual

Before first Use

 Remove the device from the packaging. Keep packaging material
out of reach of small children. There is risk of suffocation!
 Make sure the mains lead and the mains plug are in a good state:
strong, without ravels or damages.
 Caution is advised when using long extension cables.
 Do not use the device under moist circumstances.
 The metal nozzle gets hot. Watch out and do not touch the nozzle.
 Prevent damage of the heating element. Do not lock or block the
nozzle.
 Do not leave the device unsupervised when switched on.
 When in operation do not point the device at people or animals.
 Never look into the hot air nozzle.
 Do not use this device in rain, damp surroundings, or near explosive
or flammable products.
 Do not use the device on or near very dry spots to avoid fire.
 Always remove the plug from the socket when not using the device,
when replacing the nozzle or during maintenance of the device.
 Do not point the device at the same place for longer periods of time.
 Do not hold the device too close to the surface about to be worked
on as the device can overheat.
 Pay attention to the direct/indirect workspace as the heat can ignite
flammable materials, which are close by but not necessarily in view.
 Do not allow the hot parts of the device to touch the cord or other
flammable materials.
 The device should always be clean, dry and free of grease and oil.
 Do not use the device for purposes other than for which it is
intended.
 This device operates at a temperature of 600 degrees
without visible signs of this temperature (no flames); still
there is a chance of fire risk. Watch out for the hot air stream
from the nozzle. This air stream can cause burns.
Hints
17