Toshiba Multifunctional Digital System GA-1190 Network Administration Manual page 29

Setup flow for IPP printing (UNIX)
Setting up the IPP
printer connection
using CUPS
This equipment can be used with the IPP printer connection for UNIX workstation in a TCP/IP
network using CUPS. Even though IPP printing can be used in a local area network, this method
is commonly used to print over the Internet. If you allow IPP printing through the Internet, you
must configure the DNS server to enable users to access this equipment over the Internet using
the HTTP protocol. This is useful when users want to print to this equipment from outside the
local area network.
Setup procedure
1
Set up the TCP/IP and the HTTP Network Service to enable
TopAccess.
You should set the TCP/IP and HTTP Network Service from the control panel the first
time you use it, to make TopAccess available.
Setup Guide for Printing Functions
5 CONFIGURING NETWORKS (EQUIPMENT)
TCP/IP Configuration
HTTP Configuration
10 TopAccess ADMINISTRATION TAB PAGE - SETUP MENU (Printing Function)
Setting up Network Settings (Printing Function)
Setting up the TCP/IP
Setting up the HTTP network service
2
Set up the DNS Session to be available the services that use the
DNS name with a DNS server.
The DNS Session should be configured when this equipment accesses the services,
servers, and client computers using the DNS names instead of IP addresses.
Setup Guide for Printing Functions
10 TopAccess ADMINISTRATION TAB PAGE - SETUP MENU (Printing Function)
Setting up Network Settings (Printing Function)
Setting up the DNS session
3
Set up the DDNS Session if required.
If the DNS server supports the dynamic DNS service, please configure the DDNS
Session to enable the dynamic DNS service.
Setup Guide for Printing Functions
10 TopAccess ADMINISTRATION TAB PAGE - SETUP MENU (Printing Function)
Setting up Network Settings (Printing Function)
Setting up the DDNS session
Connecting over Internet
UNIX
Setup Flow for Printing Features 27