Sunny SF-B1423 User Manual page 7

Belt drive indoor cycling bike
Hide thumbs Also See for SF-B1423:
Table of Contents

Advertisement

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-
907-8669).
#90L/R
9/16*20*H8*S19
#71
D5*Φ13*1
#90L/R
9/16*20*H8*S19
#72
M5*16*Φ10
#71
D5*Φ13*1
#72
M5*16*Φ10
15
S15
2pcs
#88 1pc
2pcs
S19
#89 1pc
S15
2pcs
#88 1pc
2pcs
2pcs
S19
#89 1pc
2pcs
STEP 3:
WARNING! Read instructions carefully as improper
assembly may cause permanent damage to your
bike.
Note: The Pedals (No. 92L/R) are marked "L" and
"R" for Left and Right.
Remove the 2 Nylon Nuts (No. 90L/R) located on
the Pedals (No. 92L/R).
Turn the Tension Control Knob (No. 15)
CLOCKWISE as tightly as you can with your hand.
Align the Left Pedal (No. 92L) with the Left Crank
(No. 45L) at 90°. Turn the pedal bolt on the Left
Pedal (No. 92L) COUNTER-CLOCKWISE as
tightly as you can with your hand. Then, use
Spanner (No. 88) to tighten and secure.
Turn the Left Nylon Nut (No. 90L) CLOCKWISE
as tightly as you can with your hand. Use Spanner
(No. 88) to hold the pedal bolt on the Left Pedal
(No. 92L) and use Spanner (No. 89) to turn the
Left Nylon Nut (No. 90L) CLOCKWISE at the
same time, until it is tightened on to the Left Crank
(No. 45L).
Align the Right Pedal (No. 92R) with the Right
Crank (No. 45R) at 90°. Turn the pedal bolt on the
Right Pedal (No. 92R) CLOCKWISE as tightly as
you can with your hand. Then, use Spanner (No.
88) to tighten and secure.
Turn the Right Nylon Nut (No. 90R) COUNTER-
CLOCKWISE as tightly as you can with your hand.
Use Spanner (No. 88) to hold the pedal bolt on the
Right Pedal (No. 92R) and use Spanner (No. 89)
to turn the Right Nylon Nut (No. 90R) COUNTER-
CLOCKWISE at the same time, until it is tightened
on to the Right Crank (No. 45R).
Remove 2 Screws (No. 72) and 2 Washers (No.
71) from the Main Frame (No. 85) using Spanner
(No. 88). Attach the Water Bottle Holder (No. 70)
to the Main Frame (No. 85) using the 2 Screws
(No. 72) and 2 Washers (No. 71) that were
removed. Tighten and secure with Spanner (No.
88).
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents