Drawer For Special Uses - Toshiba E-STUDIO 600 Operator's Manual For Basic Function

4.Setting Copy Paper (Cont.)

Drawer for special uses

1
When you set paper for special uses other than normal copying (e.g. sheets for cover copying) in the
drawer, you need to set this drawer for the special use in advance. If the drawer has been set for a special
use, its indication will change on the touch panel. A drawer with this setting will not be used for normal
copying.
The following paper types are selectable according to each purpose.
Paper type
Cover sheet
Insertion
sheet
Tab paper
FAX paper
Special paper Special types of paper
Select the suitable paper type from the following according to its paper weight.
Paper type
Thick 1
Thick 2
Thick 3
42
1.BEFORE USING EQUIPMENT
Purpose
Sheet used in the cover copying mode
Sheet used in the sheet insertion mode
(Up to 2 drawers can be set for this mode.
First, set Insert source 1, then press the
drawer for the paper type of Insert source 2,
and then press the [INSERT] button.)
Paper used for the tab paper mode
Paper to print data from the FAX Unit, Printer
Kit, Scanner Kit, Printer/Scanner Kit when any
of them is installed.
(e.g. Paper with a watermark)
Paper wight
- 28 lb. Bond
- 90 lb. Index
- 110 lb. Index
Indication Reference
"COVER" P.138 "9.COVER
SHEET"
"INSERT 1" P.141 "10.SHEET
(or "INSERT 2")
INSERTION"
"TAB PAPER" P.157 "17.TAB
PAPER"
F (See the manual of
each option.)
Indication Reference
P.35 "Copy paper
types and sizes"
2
3
-