Check Staple Cartridge - Toshiba E-STUDIO 600 Operator's Manual For Basic Function

2. "Check staple cartridge"

This message will be shown only if the Finisher (optional) is installed. When the staples in the stapler of
the Finisher run out, this message appears.
Add staples to the cartridge according to the following procedure.
1
Open the front cover of the Finisher.
2
Lower the lever of the stapler to release
the lock, and then take out the staple car-
tridge.
10
3
Remove the empty staple case from the
cartridge.
292
10.WHEN THIS MESSAGE APPEARS