Toshiba E-STUDIO 600 Operator's Manual For Basic Function page 190

6.Printing Stored Documents (Cont.)
Printing the stored document after changing the settings
The following settings are available before the stored document is printed.
1. Feeding source (Press the drawer area of the feeding source. Paper in the drawer selected for the
feeding source is used only when its size and type correspond to those of the original.)
2. Number of printings (Key them in.)
3. Simplex printing / duplex printing
4. Finishing mode (Selecting the mode is limited depending on the installed optional equipment.)
5. Paper exit (Available when the Finisher or Saddle Stitch Finisher (both are optional) is installed)
6. Image shift position
7. Added date and time position
8. Page number position
6
1
Follow steps 1 to 4 of
2
Press the [SETTINGS] button.
3
Set the printing modes as required.
• See the eight items mentioned above for the setting mode. To set items 3 to 8, press the button and set the
required setting on the menu.
188
6.e-FILING
1 2
P.185 "Printing the whole document".
4
3
5
6
7
8