Sinamics g120d cu240d-2 series;
sinamics g120d cu250d-2 series (980 pages)
Summary of Contents for Siemens SINAMICS G130 TM150
Page 3
___________________ Safety information ___________________ General information ___________________ SINAMICS Mechanical installation ___________________ Electrical installation SINAMICS G130 Terminal Module 150 (TM150) ___________________ Technical specifications Operating Instructions Firmware version V5.1 11/2017 A5E03758735A...
Page 4
Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.
Safety information General safety instructions WARNING Electric shock and danger to life due to other energy sources Touching live components can result in death or serious injury. • Only work on electrical equipment if you are appropriately qualified. • Always observe the country-specific safety rules for all work. Generally, the following steps apply when establishing safety: 1.
Page 8
Safety information 1.1 General safety instructions WARNING Electric shock due to equipment damage Improper handling may cause damage to equipment. For damaged devices, hazardous voltages can be present at the enclosure or at exposed components; if touched, this can result in death or severe injury. •...
Page 9
• If you come closer than around 2 m to such components, switch off any radio devices or mobile phones. • Use the "SIEMENS Industry Online Support App" only on equipment that has already been switched off. WARNING Motor fire in the event of insulation overload There is a greater load on the motor insulation as result of a ground fault in an IT system.
Page 10
Safety information 1.1 General safety instructions WARNING Fire due to inadequate ventilation clearances Inadequate ventilation clearances can cause overheating of components with subsequent fire and smoke. This can cause severe injury or even death. This can also result in increased downtime and reduced service lives for devices/systems. •...
Page 11
Safety information 1.1 General safety instructions Note Important safety instructions for Safety Integrated functions If you want to use Safety Integrated functions, you must observe the safety instructions in the Safety Integrated manuals. Terminal Module 150 (TM150) Operating Instructions, 11/2017, A5E03758735A...
Safety information 1.2 Handling electrostatic sensitive devices (ESD) Handling electrostatic sensitive devices (ESD) Electrostatic sensitive devices (ESD) are individual components, integrated circuits, modules or devices that may be damaged by either electric fields or electrostatic discharge. NOTICE Damage through electric fields or electrostatic discharge Electric fields or electrostatic discharge can cause malfunctions through damaged individual components, integrated circuits, modules or devices.
General information The TM150 Terminal Module is a DRIVE-CLiQ component for temperature evaluation. The temperature is measured in a temperature range from -99° C to +250° C for the following temperature sensors: ● PT100 (with monitoring for wire breakage and short-circuit) ●...
The use of incorrect or not released DRIVE-CLiQ cables can cause damage or functional faults to devices or the system. • Use only appropriate DRIVE-CLiQ cables that have been released by Siemens for the associated use case. Terminal Module 150 (TM150)
Page 15
General information 2.1 Safety information Note Malfunctions due to polluted DRIVE-CLiQ interfaces Malfunctions can occur in the system through the use of polluted DRIVE-CLiQ interfaces. • Cover unused DRIVE-CLiQ interfaces with the supplied blanking covers. Note Function equipotential bonding for distributed DRIVE-CLiQ nodes Integrate all of the components that are connected via DRIVE-CLiQ into the function equipotential bonding concept.
Page 16
General information 2.1 Safety information Terminal Module 150 (TM150) Operating Instructions, 11/2017, A5E03758735A...
Mechanical installation Figure 3-1 Dimension drawing Terminal Module 150 (TM150) Note Mounting space The TM150 is installed near the Power Module on a mounting rail, which must be provided by the customer. Terminal Module 150 (TM150) Operating Instructions, 11/2017, A5E03758735A...
Electrical installation 4.2 Interface description Interface description 4.2.1 X524 electronics power supply Table 4- 1 Terminal strip for the electronic power supply X524 Terminal Designation Technical specifications Power supply Voltage: 24 VDC (20.4 V – 28.8 V) Current consumption (max./typ.): 0.5 A / 0.1 A Power supply max.
Electrical installation 4.2 Interface description 4.2.3 X531-X536 temperature sensor inputs Table 4- 3 X531-X536 temperature sensor inputs Terminal Function Function Technical data 1x2-/2x2-wire 3 and 4-wire +Temp Temperature sensor connection for sensors with (channel x) (Channel x) 1x2 wires Connection of the 2nd measurement cable for sensors with 4 wires -Temp Temperature sensor connection for sensors with...
Page 22
Electrical installation 4.2 Interface description NOTICE Damage to motor in the event of incorrectly connected KTY temperature sensor If a KTY temperature sensor is connected with incorrect polarity, it is not possible to detect when the motor overheats. Overheating can cause damage to the motor. •...
Electrical installation 4.3 Connection examples 4.2.4 Meaning of the LEDs on the Terminal Module TM150 Table 4- 5 Description of the LEDs on the TM150 Color State Description READY The electronic power supply is missing or lies outside the permissible tolerance range.
Page 24
Electrical installation 4.3 Connection examples Figure 4-3 Connection example for a Terminal Module TM150 Terminal Module 150 (TM150) Operating Instructions, 11/2017, A5E03758735A...
Electrical installation 4.4 Protective conductor connection and shield support Protective conductor connection and shield support The following diagram shows a typical Weidmüller shield connection clamp for the shield supports. ① Protective conductor connection M4/1.8 Nm ② Shield connection terminal, Weidmüller company, type: KLBÜ CO1, order number: 1753311001 Figure 4-4 Shield support and protective conductor connection of the TM150...
Page 26
Electrical installation 4.4 Protective conductor connection and shield support Terminal Module 150 (TM150) Operating Instructions, 11/2017, A5E03758735A...
Technical specifications General technical data Table 5- 1 General technical data Product standard EN 61800-5-1 Technical data Table 5- 2 Technical data 6SL3055-0AA00-3LA0 Unit Value Electronic power supply Voltage 24 V DC (20.4 – 28.8) Current (without DRIVE-CLiQ) 0.07 Power loss PE/ground connection On housing with M4/1.8 Nm screw Weight...