Advertisement
Quick Links
SERVICE PARTS
9076/9076-ND/9076A-4ND
19517
BIDET FAUCET
3010495**
Lever
835598
Hex Wrench
880074**
Lift Rod Assy
(Not for 9076-ND)
Aerator
835384
Washer
1177149
Washer
820886
Connecting Nut
Hose
871567
Plug
(Only for 9076A-4ND)
**Color code must be specified when ordering
836770A-C
Single Lever /Single Control
LAVATORY FAUCET
880002**
Plug Button Kit
871556**
Bonnet
880073
Spring Cam Assy
865171
Nut
834460
Valve
831560**
Bidet Aerator
(Only for 19517)
Aerator
880008**
Stopper
835384
1080817
Washer
O-Ring
1177149
Washer
880406
Washer
820886
Connecting Nut
880037
Link Kit
9076**/19517**
9076X** 9076A-4ND** 9076IN**/19517IN**
Hose
834754
1054592
1024405
Aerator 837261**
1031237**
834562**
AVE
INSTALLATION INSTRUCTIONS
BEFORE YOU BEGIN
All information is based on the latest product information available at the time of publication. Kohler Co.
reserves the right to make changes in product characteristics, packaging, or availability at any time without
notice.
Please leave these instructions for the consumer. They contain important information.
NOTES:
1. Flush the water supply pipes thoroughly to remove debris.
2. Inspect the supply tubing for damage. Replace as necessary.
3. Observe local plumbing codes.
4. If possible, install the faucet before installing the lavatory.
HANDLE OPERATION
Lift the handle gently, turn left for hot water, right for cold water. There are two stops in both flow and hot
water control conserve water and engergy.
ROUGH-IN DIMENSIONS
834753**
Drain
(Not for 9076A
-4ND/9076-ND)
4
836770A-C
Single Lever /Single Control
9076/9076-ND/9076A-4ND
LAVATORY FAUCET
19517
BIDET FAUCET
149
149
20º
55º
103
113
20º
AVE
Ø54
Ø36.5
Ø31.75
1
Advertisement
Related Manuals for Kohler 9076
Summary of Contents for Kohler 9076
-
Page 1: Installation Instructions
19517 BIDET FAUCET BEFORE YOU BEGIN All information is based on the latest product information available at the time of publication. Kohler Co. 3010495** reserves the right to make changes in product characteristics, packaging, or availability at any time without... - Page 2 Place stopper(11) into drain body aligning the flat side of stopper Do not use abrasive cleaners or solvents on Kohler faucets and fittings. hole(10) with the drain lever hole. NOTE: If needed apply a ring of plumbers putty around the underside of the drain flange(6), instead of using washer(7).