Cassette Tape Playback - Toshiba SD-V280 Owner's Manual

Playback (VCR)

Cassette tape playback

To play a prerecorded tape.
Playback
Preparation:
• Turn ON the TV and select the corresponding video input.
• Press DVD/VCR to select the VCR mode. (The VCR
indicator will light).
1 Load a prerecorded tape
(When loading a cassette tape without the erase
prevention tab, playback will start automatically).
2 To start playback
Press PLAY.
Playback will start. "
on the screen for about 4 seconds.
To stop playback
Press STOP once.
The tape will stop but remain fully
loaded and ready to play.
"
about 4 seconds.
Notes:
• This VCR selects the playback tape speed SP , LP or SLP automatically.
• The Cassette tape and DVD disc can be played back simulta-
neously. If you press DVD/VCR, the tape playback and DVD
playback alternate with each other on the screen(via CH3, 4
or video connection).
• When you select the VCR mode during DVD playback, DVD
playback will stop automatically after approx. 5 minutes.
30
" will appear
" will appear on the screen for
Rewind or forward the tape
Stop the playback or recording via STOP on remote.
To rewind the tape:
Press REW.
To forward the tape:
Press FWD.
To discontinue the tape-winding, press STOP. To switch to
playback directly (without STOP), press PLAY.
Forward/Reverse picture search mode
When the tape is being winded, you can switch to picture
search mode (see next page). To do this, press REW or
FWD and hold it down. The unit will resume the tape
advance or rewinding as soon as the button is released.
REW
PLAY
FWD
STOP