Manual Clock Setting - Toshiba SD-V280 Owner's Manual

Basic setup
Clock setting (continued)
If the auto clock process did not set the date and time correctly, you
must set them manually for timer recording and daylight saving time.

Manual clock setting

EXAMPLE: Setting the clock to "8:30 AM" March,
23 (SAT), 2002.
1 Press VCR MENU.
2
Press SET + or – to select "SYSTEM SET
UP", press ENTER.
3
Press SET + or – to select "CLOCK SET",
then press ENTER.
4
Press SET + or – to set the month, then press
ENTER.
5
Set the day, year and time as in step 4.
26
6
MENU
TIMER REC SET
AUTO REPEAT ON OFF
SAP ON OFF
CH SET UP
SYSTEM SET UP
+/-/ENTER/MENU
SYSTEM SET UP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
ON OFF
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING TIME
+/-/ENTER/MENU
MONTH 3
DAY 1 (WED)
YEAR 2000
TIME 12 : 00
AM
+/—/ENTER/CANCEL/MENU
MONTH 3
DAY 23 (SAT)
YEAR 2002
TIME 8 : 30
AM
+/—/ENTER/CANCEL/MENU
After setting the clock, date and time starts
functioning automatically.
To make corrections any time during the process
Press CANCEL repeatedly until the item you want to
change blinks, then press SET + or –.
Note:
After a power failure or disconnection of the power, the timer
settings will be lost. In this case, reset the present time.
2-4
2-4
1
8 : 30 SAT
AM