Connecting To A Tv - Toshiba SD-V280 Owner's Manual

Connections

Connecting to a TV

Connect the DVD/VCR to your TV.
For details of output sound, see
Notes: This method transports VHS and DVD-video signals. For enhanced DVD-video performance, we recommend you
also connect the S-Video on ColorStream
Connecting to a TV
Signal flow
To wall outlet
Notes:
• Refer to the owner's manual of the connected TV as well.
• When you connect the DVD/VCR to your TV, be sure to turn off the power and unplug both units from the wall outlet before
making any connections.
• If your television set has one audio input, connect the left and right audio outputs of the DVD/VCR to a Y cable adapter (not
supplied) and then connect to your TV.
• Connect the DVD/VCR directly to your TV. If you connect the DVD/VCR to a VCR, TV/VCR combination or video selector,
the playback picture may be distorted as DVD video discs are copy protected.
18
.
52
® component video outputs to your TV/monitor. (see page 19.)
DIGITAL AUDIO
OPTICAL
DVD OUT DVD, VCR OUT LINE IN1 UHF/VHF
ANALOG AUDIO S COMPONENT
COAXIAL IN
Y VIDEO VIDEO
L
(FROM ANT)
R
P L L
B (MONO)
AUDIO AUDIO OUT
(TO TV)
P R R
R
3
CH
7230007448
(yellow) (red)
To VIDEO
Audio/video cable (supplied)
OUT
To video input
(yellow)
• Make the following setting.
On-screen display
"Audio Out Select"
4
(white)
To ANALOG AUDIO OUT
To audio inputs
(red)
(white)
TV or monitor with
audio/video inputs
Select: Page
56
"Analog 2ch"
58