Advertisement
NOTE: All disassembly procedures assume that the system is turned OFF, and discon-
nected from any power supply (the battery is removed too).
Maintenance Tools
The following tools are recommended when working on the notebook PC:
• M3 Philips-head screwdriver
• M2.5 Philips-head screwdriver (magnetized)
• M2 Philips-head screwdriver
• Small flat-head screwdriver
• Pair of needle-nose pliers
• Anti-static wrist-strap
1. Remove the 4 LCD Rubber
Pads (Circled Red)
2. Using a Philips screwdriver
remove the 4 screws
Advertisement
Need help?
Do you have a question about the P150HM and is the answer not in the manual?