List Of Faults; Technical Specifications - Baxi MS THINK+ Installation Instructions Manual

8. LIST OF FAULTS

Fault
10 External probe sensor
30
Flow sensor 1
32 Flow sensor 2
84 BSB, address conflict
98 Additional module 1
99 Additional module 2
Temperature limiter temps/mode
178
1
CH
Temperature limiter temps/mode
179
CH2
335
BX21 no function
336 BX22 no function
324 BX same sensors

9. TECHNICAL SPECIFICATIONS

Input voltage
Rated frequency
Power input model 1AT-1BT
Power input model 1AT-2BT
Housing box dimensions
Weight of model 1AT-1BT
Weight of model 1AT-2BT
Weight of template box
Description of fault
Heating circuit enabled with no command (thermostat, room unit or external unit) or external probe
faulty
Mixed circuit 1 sensor not detected
Mixed circuit 2 sensor not detected
2 or more room units configured for the same heating circuit
AVS 75 accessory not detected or recognised
AVS 75 accessory not detected or recognised
Limit thermostat in mixed circuit 1 tripped (temporary fault)
Limit thermostat in mixed circuit 2 tripped (temporary fault)
BX21 sensor not configured
BX22 sensor not configured
Two or more sensors configured for the same function
19
AC 230 V
50÷60 Hz
95 W
140 W
700x450x210 (mm)
14 Kg
17 Kg
10 Kg
7222520.03 (1-11/15)