Safety Instructions - Televes T.OX Series Quick Manual

O. F. Transmitter

Safety instructions:

Caution Statements
Product inspection - Inspect the equipment for
shipping damage. Should any damage be discovered,
immediately file a claim with the carrier.
Important Safety Instructions - To ensure proper
installation and operation, take a moment to read
this guide before proceeding with the installation. If
you have any questions or comments about the T.0X
Series Optical Fiber Receivers please contact your
dealer.
WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK DO
NOT EXPOSE TO RAIN OR MOISTURE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
A product and cart combination should be
moved with care. Quick stops, excessive force
and uneven surfaces may cause the product and
cart combination to overturn.
The lightning flash with arrow head symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE. DO NOT OPEN THE CABINET,
REFER SERVICING TO QUALIFIED PERSONNEL
ONLY.
CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USE
THIS (POLARIZED) PLUG WITH AN EXTENSION
CORD RECEPTACLE OR OTHER OUTLET UNLESS
THE BLADES CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
Important Safety Instructions
1. Read and Follow All Instructions - All the safety and
operating instructions should be read prior to and
followed while operating this product.
2. Retain Instructions - The safety and operating
instructions should be retained for future reference.
3. Heed Warnings - All warnings on the product and in
the operating instructions should be adhered to
4. Cleaning - Disconnect this product from any
electrical source before cleaning. Use a damp cloth;
do not use liquid or aerosol cleaners.
5. Attachments - Do not use attachments that are not
recommended by the product manufacturer as they
may cause hazards.
6. Water and Moisture - Do not use this product near
any source of water.
7. Mounting – Do not place this product on an
unstable cart, stand, tripod, bracket, or table. The
product may fall, causing serious injury to persons or
nearby objects, and serious damage to this product.
Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with
the product. Any mounting of the product should
follow the manufacturer's instructions, and should
use a mounting accessory recommended by the
manufacturer.
8. Ventilation – Slots and openings in the cabinet
are provided for ventilation and to ensure reliable
operation of the product. These openings should
never be blocked or covered in any way. This
product should not be placed in any case, cabinet,
or rack unless proper ventilation is provided and the
manufacturer's instructions have been adhered to.
9. Power Sources - This product should be operated
only from the type of power source indicated on the
marking label.
10. Grounding or Polarization - Do not bypass or
defeat electrical plug polarization or grounding.
Doing so will violate the warranty and may pose a
risk of fire or electrocution.
11. Wire Protection – Ensure all connected wiring
is routed correctly to avoid damage including
pinching, excessive bends, or compression.
12. Electrical Supply, Grounding,
Protection – Ensure that all local or national
electrical codes are followed. Seek the advice of a
licensed electrician, professional engineer, or other
licensed expert. See example wiring figure.
13. Power Lines - Always use caution and avoid
operating this or any connected equipment near
uninsulated power line or any other hazards.
14. Object and Liquid Entry - Never allow objects or liquid
of any kind into this product through openings. Doing
so could result in fire or electric shock.
15. Servicing – There are no user serviceable parts.
Do not attempt to service this product or remove
covers. Doing so may expose you to dangerous
voltage or other hazards. Refer all servicing to
qualified service personnel. Examples of damage
requiring service include but are not limited to:
- Damage to power-supply wiring.
- If liquid has been spilled, or objects have fallen
into the product.
- If the product has been exposed to rain or water.
- If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the product to its normal operation.
- If the product has been dropped or physically
damaged.
- When the product exhibits a distinct change in
performance.
16. Replacement Parts - Ensure that repairs are
performed by qualified technicians and that only
manufacturer supplied or authorized parts are
used.
17. Safety Check – Upon completion of any service
or repairs to this product, ensure safety checks
to determine that the product is functioning per
manufacturer specifications are performed.
18. Heat - The product should be situated away from
heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers) that
produce heat. Ensure that ambient temperature is
maintained in the manufacturer specified operating
range.
Optical connection instructions:
An SC/APC single mode fiber cable must be used.
Remove the protective cover from the optical
connector on the unit and the cap on the cable
connector.
Carefully align the guides on both connectors
when plugging a cable to the device, then push the
connector all the way in.
Take special care to avoid damaging the unprotected
ends of the connectors, as small scratches, impurities
and/or particles of dirt, oil, grease, sweat, etc. may
significantly affect the quality of the signal.
To clean the ends of the connectors, gently rub
with a lint-free lens cleaning cloth, dampened
using additive-free isopropyl alcohol. Make sure the
alcohol evaporates fully before connecting. Keep
the connector covers and cable caps in a safe place
in case they are needed in the future. Always fit the
covers on the connectors of devices that are not
connected to cables to prevent the laser beam from
damaging the eyes.
Do not turn the transmitter on without a fiber optic
cable connected to it.
and Surge
Safety measures
Warning.-
This product emits an invisible laser beam. Avoid
contact with laser radiation. The use of equipment
such as binoculars or magnifying glasses may
increase damage caused to the eyes.
According to EN60825-1_ 2007
The use of the equipment in any other way than
the specified in this manual may lead to exposure
to harmful radiation.
Do not use the equipment in any way that does
not comply with the operating instructions or
in any conditions that exceed the stipulated
atmospheric specifications.
Never point the laser beam at people or animals.
5 5
EN