Download Print this page

EPV Polar Max Recessed Series Installation Manual

Advertisement

Quick Links

Important Safety & Warning Precautions
Make sure to read this user's guide and follow the procedures below.
Caution: The screen's Black Top Drop is already set to its maximum drop distance. There is NO extra Black
Top Drop in the roller. Unapproved changes or modifications (except for cutting the power cord for hardwire
installations) to this unit are prohibited and will void your warranty. For more information, please contact our
Technical Support Department at (877) 511-1211 Ext. 604.
• Please retain this user's guide for future reference.
• To avoid damaging the unit, do not use with any unauthorized accessories not recommended by the
manufacturer.
• Handle the unit carefully during transportation to avoid any damages.
• To ensure safe and reliable operation, direct connection to a properly grounded power source is
advised.
• The power outlet supplying power to the unit should be close to the unit and easily accessible.
• Do not install the unit on uneven, inclined surfaces;
• Do not install in damp places to avoid an electric shock or short circuit.
• Do not place any heavy objects over the power cord.
• Position the power cord properly to avoid creating a trip obstacle.
• To avoid an electrical shock or fire, due to a loose contact or short circuit, do not overload the power
cord.
• The internal & external parts of this unit are not end user serviceable. Do not attempt to disassemble
this unit by yourself. No one except authorized technicians can open and make repairs to this unit.
• Make sure the power source that this unit is connected to has a continuous power flow.
• If there is need to use an extension cord, make sure the cord has an equal rating as the appliance to
avoid over heat.
• Do not handle the power plug when your hands are wet or your feet are in contact with water.
• Properly dispose of this equipment according to the environmental regulations in your area when
product is no longer of service.
Do not use this unit under the following circumstances.
Disconnect the power cord under the conditions of heavy rain, wind thunder or lightning.
Avoid direct sun light, rain shower and moisture.
Keep away from fire sources and high temperature to prevent this device from overheating.
Cut off the power supply first before transportation or maintenance.
To avoid possible injury and/or an electric shock, do not attempt to use this screen if there is obvious
damage or if there are any evident broken parts.
Rev. 03072019JA
Polar Max Recessed Series
Recessed In-ceiling Ambient Light
Rejecting Projector Screen
Installation Guide
1
www.epvscreens.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the Polar Max Recessed Series and is the answer not in the manual?

Questions and answers

Summary of Contents for EPV Polar Max Recessed Series

  • Page 1 Polar Max Recessed Series Recessed In-ceiling Ambient Light Rejecting Projector Screen Installation Guide Important Safety & Warning Precautions Make sure to read this user’s guide and follow the procedures below. Caution: The screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra Black Top Drop in the roller.
  • Page 2: Pre-Installation

    The installer must insure that proper mounting hardware is used to provide adequate strength suitable for the installation. EPV Screens is not liable for any faulty installations. For limit adjustment instructions, please contact our Technical Support Department at (877) 511-1211 Ext.
  • Page 3 Screen operation Electric Current: The screen operates on AC110V at 60Hz/ 1.18A 1.After ensuring the power outlet & screen are compatible (voltage), plug the power cord into the power outlet. 2. Once the screen has power, you’ll be able to control it using any of the 6 methods described below. 6 ways to control the Polar Max Aerie 1.
  • Page 4: Installation Instructions

    Cord (2-Prong Power Cord for some countries) for use in a non-concealed power outlet. If your installation will be entirely concealed (including power outlet), EPV Screens strongly recommends a hardwire connection. Please refer to the image below for both 110v & 220v wiring information.
  • Page 5: Notice To Installer

    Notice to Installer: Please use the following installation instructions to obtain superior optical performance from the Polar Star® Angular Reflective ALR (Ambient Light Rejecting) Screen. Make sure to follow these instructions in order for the Polar Star® to perform correctly. •Angular-Reflective material is not compatible with ultra/short-throw projectors •Minimum lens throw ratio 1.5x image width •Ambient light must not come from the same direction as the projector...
  • Page 6 A. Above ceiling installation instructions Assembly 1. Insert the Hex Screw (B) through the Hanging Bracket’s (C) screw hole and secure with the Case Rail Nut (A). Slide the Hanging Bracket (C) through the railing on top of the case. 2.
  • Page 7 B. Below ceiling installation instructions 1. Measure and cut the ceiling installation space. The width should not exceed 120mm. Measure the length of your screen to determine the length. Note: The length of the installation space is not greater than the screen size table (A3), and the width is not less than the screen size table (A5).
  • Page 8 (I) to ensure a firm connection. Use the socket wrench (M) to make sure that the bolts are firmly tightened. Push Ceiling Socket wrench (H) 5. Install plastic cover panel (N) to complete the installation. For local EPV Screens contact or Technical Support, please visit www.epvscreens.com Rev. 03072019JA www.epvscreens.com...