Table of Contents
Advertisement
Quick Links
AcousticPro 4K eFinity Series
EDGE FREE® Acoustically Transparent Fixed Frame Screen
Product Description:
The eFinity Series is a fixed frame projection screen that uses Elite Prime Vision's (EPV®) EDGE FREE®
technology. The EDGE FREE® design resembles a giant size flat panel TV display. The eFinity includes a
micro-thin aluminum bezel trim to further enhance the frame appearance and absorb minimal projector
overshoot. An LED kit is also included for mood lighting.
The screen material included in the A4K eFinity fixed frame is our Award-winning AcousticPro 4K, which
is a sound transparent, moiré-free front projection material designed for 4K/8K Ultra HD projectors for
environments with controlled lighting.
For optimum projection performance, please refer to the list below for proper maintenance and cleaning.
• When cleaning the AcousticPro 4K material, use a soft-bristle toothbrush with mild soap to remove
any dirt.
• Never rub or apply pressure when cleaning the surface.
• Never attempt to use any solutions, chemicals or abrasive cleaners on the screen's surface.
• In order to avoid damaging the screen, avoid touching it directly with your fingers, pens/pencils or
any other sharp or abrasive objects.
Qty
Main Frame Parts
item
vertical frame
Part
A.
½ horizontal frame
Part
B.
½ horizontal frame
Part
C.
12282021JA
USER'S GUIDE – V2
1. Frame and Edge TrimParts List
2 pcs
www.epvscreens.com
Qty
Edge Trim Parts
item
Part
D.
Part
E.
Part
F.
2 pcs
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for EPV EDGE FREE AcousticPro 4K eFinity Series
Summary of Contents for EPV EDGE FREE AcousticPro 4K eFinity Series
- Page 1 USER’S GUIDE – V2 Product Description: The eFinity Series is a fixed frame projection screen that uses Elite Prime Vision’s (EPV®) EDGE FREE® technology. The EDGE FREE® design resembles a giant size flat panel TV display. The eFinity includes a micro-thin aluminum bezel trim to further enhance the frame appearance and absorb minimal projector overshoot.
- Page 2 2. Hardware Parts List Item Parts List 100H 110H 120H 135H 150H Center Joints (1) Elbow Joints (2) M4x6 Screws Spring Hook Spring (preloaded) Top wall brackets M5x50 Wall Screws Hollow Wall anchors Bottom wall brackets Angle cover LED light strip clip Center Support Bar White gloves Fiberglass rod...
- Page 3 Frame Assembly Step 1: Place the soft foam sheet on a clean area on the ground where the Foam sheet Foam sheet screen will be assembled. Step 2: Position the pieces of the frame on the foam sheet in the arrangement Step 3: Remove the foam in all frame ends before assembling the frame Remove the foam Note: Springs are preloaded inside the frame’s grooves.
- Page 4 Screen Material Velcro tape attachment Step 7: Place the frame on a clean area and use the included velcro tape to adhere it on the back edge of the frame as show in the illustration below. Step 8: Put on the white gloves(m) and carefully unroll the screen material on a clean surface from the roller to the other side as shown below.
- Page 5 Step 10: Next, lay the black backing material on top of the back side of the AcousticPro 4K material as shown below. Make sure the black backing’s Velcro is facing up. Black backing Velcro facing up Step11: Carefully and gently place the assembled frame on top of the screen material. Make sure to not allow the angle edge of the frame to come in direct contact with the screen material to avoid puncturing it.
- Page 6 Step 13: After attaching the entire black backing to the frame with the velcro, use the spring hook (d) to attach the spring (e) to the hole located on the screen material’s outer edge in the following order. Make sure the spring hook goes over the rod. Attach the four corners first (1).
- Page 7 Step 14: Insert the Center Support Bar (i) into the upper top groove on the back of the frame with the bottom end near the approximate center point of the frame and rotate it in at an angle so that both ends of the bar are in alignment with the groove.
- Page 8 Step 16: Install the angle cover(j) on each corner of the frame and install the LED light strip to hold down the angle cover. Then insert the LED light clip (l)to hold the LED light strip in place. Wall Installation Step 17: Measure the overall length and height of the frame and drill holes for the top brackets.
Need help?
Do you have a question about the EDGE FREE AcousticPro 4K eFinity Series and is the answer not in the manual?
Questions and answers