Loewe Reference Sound Standspeaker Slim Operating Instructions Manual page 7

Connection
Connecting the speakers to the audio source
Connect the speaker wires on the bottom of the speaker. One of the two
wires of the speaker cable is marked black. Connect this black wire with the
black screw on your amplifier or audio output, and the black terminal on the
loudspeaker.
Therefore turn the screw counterclockwise a few turns on. Run the wire end into
the screw and tighten the screw clockwise.
Connect the unmarked wires with the red terminals.
Speaker
wires
Connecting the subwoofer to the mains
Insert the plug at the end of the cable into the power jack at the bottom of the
speaker.
Plug the power adapter of the two speakers in one outlet with 220 - 240 V
50/60 Hz AC.
Phase
180° 0°
AudioLink
-3dB
Equalizer
+6dB
50Hz
Crossover
Frequency
250Hz
min
Power
Bass
Intensity
adapter
max
Front
Left Right
Reference Sound Standspeaker Slim
Front
left
Power
adapter
Left Subw Right
Rear
Front
Left Right
Line In
Rear
Left Right
Center
Speaker
Out
Surround
left
Front
right
Power
adapter
Power Mode
OFF ON Auto Manu.
Surround
right
7 -