RAM Commercial Promaster 2018 User Manual page 92

Hide thumbs Also See for Promaster 2018:
Table of Contents

Advertisement

WARNING!
• Turn on the Hazard Warning flashers.
• Block the wheel diagonally opposite the
wheel to be raised.
• Set the parking brake firmly and set an
automatic transmission in PARK; a
manual transmission in REVERSE.
• Never start or run the engine with the
vehicle on a jack.
• Do not let anyone sit in the vehicle when
it is on a jack.
• Do not get under the vehicle when it is
on a jack. If you need to get under a
raised vehicle, take it to a service center
where it can be raised on a lift.
• Only use the jack in the positions indi-
cated and for lifting this vehicle during a
tire change.
• If working on or near a roadway, be
extremely careful of motor traffic.
• To assure that spare tires, flat or in-
flated, are securely stowed, spares must
be stowed with the valve stem facing the
ground.
90
Jack Warning Label
CAUTION!
Do not attempt to raise the vehicle by
jacking on locations other than those indi-
cated in the Jacking Instructions for this
vehicle.
Assembled Jack
1. Loosen (but do not remove) the wheel lug
bolts by turning them to the left one turn
while the wheel is still on the ground.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents