Device Settings; Enable Settings - Pakedge RT-3100 User Manual

RT-3100 5-Port Single-WAN Gigabit Router User Guide

Device Settings

Device Settings tile, configure basic router functionality.
From the
Enable various settings. (LEDs, UPnP, WAN Access, and SNMP).
l
Run Diagnostic tests. (Ping, traceroute, nslookup, speedtest).
l
Reset the device. (Restore factory default settings).
l

Enable settings

With the toggle button,
To enable a setting:
1. Go to the Advanced tab > Device Settings , then enable/disable LEDs, UPnP, WAN
Access, and SNMP (see below).
Enable or Disable various settings.
28