Samsung Flip WM65R User Manual page 48

2nd 3rd
Advanced Settings Print Server
Network Drive
Description
Set up the Print Server to use the printing function.
" For more information, refer to 'Printing'.
• Connect to Server
– Auto: View and select one from a list of server IP addresses of the PCs where Flip Printing Software is installed,
available on the network.
– Manual: Enter the Server IP address of the PC where Flip Printing Software is installed.
• Server IP: Enter the Server IP address of the PC where Flip Printing Software is installed.
• Server Port: Enter the Server Port address of the PC where Flip Printing Software is installed.
Add or edit network drive accounts. You can only add network drives by using Samba.
• Add Account: Add new network drive accounts. Only Samba can be added to the network drive.
" SAMBA 2.0 or later is supported. If you cannot connect to the network drive, update SAMBA to the latest version.
" To register a network drive account, you must enter the Address, Username, and Password.
– Address: //computer IP address/shared folder name
" When entering an address, be sure to use / instead
of ₩ and \.
For example, if you share a folder named
"sharedfolder" on a PC with IP address of
12.34.56.789, enter "//12.34.56.789/sharedfolder"
as the address.
– Username: A Windows account with permissions to
the shared folder
" When entering a domain, be sure to use ₩ or \.
For example, DomainName₩WindowsAccount
– Password: The password you set for your Windows
account
• Edit Account: Edit network drive accounts.
Add Account
Address //12.34.56.789/sharedfolder
Username DomainName\WindowsAccount
Password
Save Cancel
********
48