Connecting To A Pc; Connecting Using A Cable; Connecting Via The Wifi Display Function - Samsung Flip WM65R User Manual

Connecting to a PC

IMPORT → PC
MOBILE
PC
PC
HDMI 1 HDMI 2 HDMI 3
" HDMI 3 is available when the product is equipped with a tray (optional purchase).

Connecting using a cable

1
Connect the product to the PC using an HDMI cable.
" HDCP contents will not show on the screen if
HDMI IN
2
Select IMPORT → PC → HDMI from the top of the screen.
3
To control the PC from the product screen, connect the supplied USB cable to the TOUCH
OUT port on the product.
" If used in a multi-screen setup, make sure you have configured FLIP as the main display.
TOUCH OUT
IMPORT
USB NETWORK DRIVE
Wireless Remote PC
PIP Capture is set to On.

Connecting via the WiFi Display function

" This function is only available for the PC that support the WiFi Display function.
1
Select Action Center or Devices in the taskbar notification area of the PC.
2
Click Connect or Project and select a [Flip] Samsung WMR Series device to complete the
connection.
" The connection procedure may vary depending on the PC.
" After the WiFi Display connection is made, you can control the PC screen from the product
screen.
" This function is only supported by Windows 10.
STEP. 02
STEP. 01
33