American Standard Fluent T186900 Installation Instructions

Fluent
®
Roman Tub Filler
Thank you for selecting American Standard...
the benchmark of fine quality for over 140 years.
To ensure that your installation proceeds smoothly-please read
these instructions carefully before you begin.
RECOMMENDED TOOLS
ROUGHING-IN
DIMENSIONS
1
INSTALL SPOUT
• Apply 4-5 drops of THREADLOCKER (1)
on DIVERTER INSERT (2) threads (supplied).
NOTE: If installing on finished deck, install DIVERTER
INSERT (2) through WASHER (6).
• Thread DIVERTER INSERT (2) carefully until it touches the
installation surface, be sure the RUBBER RING (5)
is properly seated in it's RECESS at the base of the
SPOUT (3).
• Thread SET SCREW (4) using 5 mm hex wrench supplied.
Make certain SET SCREW (4) is properly aligned and tight
so that SPOUT (3) is locked in place.
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2018
INSTALLATION
INSTRUCTIONS
Phillips Screwdriver
Flat Blade Screwdriver
250mm
(9-3/4")
219mm
(8-5/8")
140mm
(5-3/8")
MOUNTING
SURFACE
199mm
(7-7/8")
Turn off hot and cold water
CAUTION
supplies before begining.
T186900
T186901
Channel Locks
165mm to 305mm
(ADJ. 6-1/2 TO 12)
93mm
(3-5/8")
1" MAX.
(25 mm)
8" TO 16"
FLEXIBLE INSTALLATION
(203 TO 406 mm)
3
1
- 1 -
Certified to comply with ANSI A112.18.1M
Hex Wench
Adjustable Wrench
(supplied)
40mm
(2-1/16")
(1-5/8")
DIA.
4
Hex wench
(supplied)
RECESS
5
MOUNTING
2
SURFACE
6
208mm
(8-3/16")
53mm
M965950 (8/18)