How To Operate The Robot; Turn On\Off; Start-Up Guide - Robot sanbot User Manual

Part Two How to Operate the Robot

1. Turn On\Off

Press the power switch at the bottom of the robot to turn on or turn off the power.
It is easy to move the robot in the state of power-on. But when you need to move the robot in the state of power-off, please push its front body forward, i.e. push it
go backwards, or push its back slowly at constant speed.

2. Start-up Guide

When starting the robot for the first time or after restoring the local factory settings, touch the screen to start the wizard, then go through all proposed steps, i.e. Start-up
loading, Choose menu language, Robot self-introduction (you can choose to skip the cartoon), Agree terms for usage, Choose your WIFI and input the password, Choose
screensaver role, Show the password of administrator (the default password for administrator is admin), Scan OR code by mobile App "Q-Link" to add the robot as admin (you
can skip this step), Other settings, Finish.
The above settings will not show in the following start-up.
ROBOT USER MANUAL
8