Battery Indication; Mode Three: Wire Charging - Robot sanbot User Manual

Mode Three: Wire charging

Take out the power adapter in the charging pile. Connect one end to the charging socket on the back of the robot and the other end to the power socket.
Note: Since the robot cannot move in the mode of wire charging, all functions related to movement, such as moving forward, circling, wandering, following, dancing, etc., will
be forbidden. But other functions, such as playing films and music, turning on the projector, etc., will not be affected. When it charges via the charging pile, the robot can move
freely. Charging will stop if the robot disconnect with the charging pile.

3. Battery Indication

For the robot (Power on status):

When it isn't charging, the wing indicator light flashes red which means the residual battery capacity is equal to or less than 40%. The touch screen also displays current
residual battery capacity.
When it is charging, if the wing indicator light flashes red, the residual battery capacity is equal to or less than 40%, and if the light keeps yellow, the residual battery
capacity is between 40% and 80% (not including 80%) , and if the light keep green, the residual battery capacity is equal to or more than 80%. The indicator light goes out
after stopping charging.
ROBOT USER MANUAL
28