24
Wind shift alarm
Using AutoTack in Vane mode
S T4000 P lus Wheel & Tiller Autopilots Owner's Handbook
-1 +1 -10
+10
standby
standby
The automatic tack function, when used in Vane mode, turns the
vessel so that the locked apparent wind angle is changed to an
equal angle on the opposite bow.
Initially, the ST4000 Plus turns the vessel through the specified
tack angle (the factory default is 100°). Then the locked heading is
adjusted until the required apparent wind angle is achieved.
WINDS HIF T
auto
standby
auto
+1
+10
-1
-10
LAS T WND?
-1 +1 -10
+10