Alcatel 1S 5028A User Manual page 48

To add a Wi-Fi network
When Wi-Fi is on, you can add new Wi-Fi networks
according to your preference.
• Touch Settings > Network & internet > Wi-Fi > Add
network.
• Enter the name of the network and any required
network information.
• Touch SAVE.
To forget a Wi-Fi network
The following steps prevent automatic connection to
networks which you no longer wish to use.
• Turn on Wi-Fi, if it's not already on.
• On the Wi-Fi screen, touch the name of the saved
network.
• Touch FORGET in the dialog that opens.
9.1.2 Cellular network
Go to To Settings > Network & internet > Cellular
network to enable data roaming, set your preferred
network type, check the network connection you are
using or create a new access point, etc.
93
9.1.3 Data usage
The first time you turn on your phone with your
SIM card inserted, it will automatically configure your
network service: GPRS, EDGE, 3G or 4G.
If the network is not connected, you can turn on cellular
data in Settings > Network & internet > Data usage.
Data saver
By enabling Data saver, you can reduce data usage by
preventing some apps from sending or receiving data in
the background.
Cellular data
If you do not need to transmit data on cellular networks,
turn off Cellular data to avoid incurring significant
charges for data use on local carrier cellular networks,
particularly if you do not have a cellular data agreement.
Data usage is measured by your phone, and your
carrier may count differently.
9.1.4 Hotspot & tethering
To share your phone's data connection via USB and
Bluetooth, or as a mobile hotspot, go to Settings >
Network & internet > Hotspot & tethering to activate
these functions.
94