3-4.
Error status(ERROR)
◆
Function
Display the error status of the detailed project content。
Any error occurs during printing, the printer will automatically convert into an
error state, then the ERROR lamp and the other corresponding LED lights. Rule
out the wrong item, press the LINE key to clear the error state, and to return to
the paused state.
Screen display
Error status
Check the label
◆
Function key operation
LINE:
To clear the error state, switch to the suspend state。
3-5.
Setting the menu mode(MENU)
◆
Function
Printer settings, then set the value saved to the printer EEPROM。
◆
Screen display
[Setup Menu]
Print density
◆ 功能按键操作
MENU/EXIT:Termination of the menu to set the state, restore the state of the OFF
。
LINE
ENTER/SAVE:Sure to set the project to display the settings screen。
★Error details of the project
Please refer to the latter [error display and
processing methods]
★[The setup menu]The details of the project
Reference to the classification menu item
after setting。