5-2-2 Open the packaging intact
ribbon volume, make sure it is
inside or outside carbon. The
right
diagram
carbon) is installed in the supply
shaft。
5-2-3 The right to open the handle
of the print head 。
5-2-4 End, pull out the ribbon
after ribbon leading axis, the
print head assembly, the ribbon
flap paste fixed on the paper
tube。
5-2-5
The ribbon in order, and the
ribbon roll winding shaft flat
5-3
Labels installation instructions
5-3-1
The right to open the handle of
the print head
ribbon
(outer
。
Empty paper tube
Ribbon rewind hub
Outside
Ribbon guider