LG -600 User Manual page 18

□
Installation Steps
Computer
Until all the installation is complete press the "Add Printer Wizard
prompts".
7. Daily inspection, cleaning and maintenance
7-1.
Routine maintenance of the print head and printing rubber roller
Print run out a roll of ribbon, the print head and printing rubber roller cleaning and
maintenance, it can guarantee the print quality and extend the life of the printhead
7-2.
Print head cleaning
Due to long print or other causes the print head adhesion debris to be cleared in
time. Please note that when cleaning, first turn off the printer, open the handle of the
print head to open the print head, remove the ribbon and label, and then were supplied
with the cleaning pen gently wipe the print head clean so far.
Promptly removed off the dirty part of the cleaning written, to avoid any dirt or
debris can damage the print head.
Do not use hard tools items to remove the fixtures to avoid damage caused by the
：
Control Panel
Printer and device
Add printer
Choose printer file
。