to adjust the selection using the sensor
6.
Connection and installation of the printer (Add Printer)
6-1
The printer connection
6-1-1 Input power
□
The printer applies to the input power range of AC100-240V, 50/60Hz。
□
Random with a standard three-plug power cable back into the unit power outlet
and then connected to AC power, turn the power switch, which can boot。
6-1-2 Data communication connection
□
The printer configuration standard USB 2.0 and IEEE1284 parallel data transfer
port, factory set to the USB port, the user may need to modify or set using the
parallel port。
□
Randomly with USB 2.0 data cable, insert the corresponding port of the back of
the machine and the computer is connected with the external data input
6-2
The installation of the printer (Add Printer)
。
。