Please see "LOCATION OF CONTROLS" for the location of
each button used for the following operations.
SETTING THE DIAL MODE
Depending on your dialing system, set the mode as follows:
q Press and hold
w To set the dial mode for pulse dialing, press
mode for tone dialing, press
A confirmation tone sounds again to indicate the setting is complete.
Note
Most phone systems use tone dialing.
MAKING A CALL
1. MAKING A CALL
1, 4
3
2. ANSWERING A CALL
1, 2
until you hear a confirmation tone.
FLASH
TONE/
q Press
TALK
w Listen for the dialtone.
e Dial the phone number you are calling.
r To hang up, press
handset on the base unit. The TALK/BATT
LOW LED turns off.
q Simply pick up the handset or press any key if
the handset is located away from the base unit.
The TALK/BATT LOW LED will light.
w To hang up, press
on the base unit.
The TALK/BATT LOW LED turns off.
.
.
TALK
TALK
10
. Or to set the dial
#
again or place the
or place the handset