The Handset
Using the Handset
Using the Handset
➤
Pick up the handset and press
LCD.
When the cordless digital telephone communicates between
the base unit and the handset, the screen goes to standby
(shown right), and the telephone is ready to use.
If you see "
handset is at the range limit of your cordless digital telephone, do the following:
➤
During a call, move back in range within 20 seconds.
➤
In standby mode, move back within range.
Note
When the LCD shows "
cordless mode at the base.
Charging the Handset
➤
Place the handset on the base unit either face down or face up (shown below), with
or without the belt clip attached.
The battery pack in the handset automatically recharges in either position.) For
information on charging the Battery Pack, see
20
NO SERVICE
" on the LCD when talking and the
DKT MODE
. You may see "
ACQUIRING LINK
," the telephone has not been transferred to
page
14.
Strata DKT2004-CT Cordless Digital Telephone 10/02
" on the
1187