INSTALLATION
1. SETTING UP THE BASE UNIT
For use on a desk or counter top follow the instructions below.
DESKTOP MOUNTING:
Snap the bracket's tab into the
notches on the base.
Raise the
antenna
to vertical
position.
• USE ONLY WITH Supplied AC ADAPTOR (TAC-2981; power source
AC 120V, 60Hz/DC 9V).
• The AC adaptor must remain connected at all times. (It is normal for
the adaptor to feel warm during use.)
Fasten the AC adaptor
cord to prevent it from
being disconnected.
Telephone Line Cord
AC Adaptor
5
Single-Line
Telephone Jack
(RJ11C)
Power Outlet
(AC 120V, 60Hz)