Table of Contents
Advertisement
8. SENDING TONE SIGNAL (for Pulse service user)
Even if you have Pulse service (the Tone-Pulse switch is set to Pulse),
you can use this phone with banking and other phone services requiring
touch tone signals.
q Dial the service number and wait for the connection.
w Press
TONE
tones on the line.
9. MUTING
Press
to turn off the microphone during a conversation.
MUTE
The TALK/BATT LOW LED blinks. You may speak to someone in the
room without the caller overhearing.
To resume normal conversation, press
10. PAGING
To locate the handset (while it is off the base), press
unit. The handset beeps for 60 seconds. To stop paging, press
or return the handset to the base unit or any key at the handset.
Notes
• You cannot page the handset during a call.
• Be careful not to get your ear too close to the ringer on the back side of the handset while
paging, because it may be too loud.
11. OUT OF RANGE
During a call, as you begin to move too far from the base, you first hear
a clicking sound. As you travel farther, the noise increases. If you travel
out-of-range, your call terminates.
, then enter the numbers required. You will hear the
or
MUTE
12
.
TALK
on the base
PAGE
PAGE
Advertisement
Table of Contents
