Panduit NET-ACCESS N21SPH Instructions

© Panduit Corp. 2012
Split/Hinged Side Panels Installation
• VIEW 3 Secure Bottom Support Bracket to cabinet frame with [3] M5 Torx Screws
• VIEW 1, 2 Secure Vertical Support Bracket to cabinet frame and bottom support bracket with [1] M5 Torx Screw and [2] Hex Nuts
• See Page 2 for Side Panel Installation Instructions
Vertical Support Bracket
(Top)
Vertical Support Bracket
(Bottom)
FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp
N -A
ET CCESS
(Split/Hinged Side Panels - N21SPH, N22SPH, N51SPH, N52SPH)
INSTRUCTIONS CM606
VIEW 1
[2] Hex Nuts
(use 6mm Socket
Wrench)
[1] M5 Torx Screw
(use T25 Torx bit)
N-Type Network Cabinets
VIEW 2
[3] M5 Torx Screws
(use T25 Torx bit)
Page 1 of 2
Bottom Support Bracket
(Part of bracket cut away to
show detail)
VIEW 3