Table of Contents
Advertisement
Features
Message Waiting
[PhDN/MW] Message Waiting
To use this feature, your telephone must be programmed for both [PhDNs] and MW.
Your telephone has one built-in
1. Press the [PhDN/
MW] indicated by the
flashing red LED
...or
no answer, hang up
and try at a later
time.
2. Press
receiving the
message.
3. Repeat Steps 1 and 2
to answer the next
messages.
Cancel the Message Waiting Light
1. Press the [PhDN]
associated with the
flashing.
2. Enter
3. Press
62
Your telephone rings the station or voice mail device
that left the message. The LED on your telephone
continues to flash.
. If there is
after
If you have more than one MW indication from
different sources, the red LED continues to flash, after
you answer the first message.
You hear a steady dial tone and the [PhDN] LED
lights steady.
.
The dial tone stops.
.
The flashing MSG LCD stops and the message is
canceled.
that works with your [PDN].
Strata DKT2104-CT Cordless Digital Telephone 5/00
Advertisement
Table of Contents
