Table of Contents
Advertisement
Features
Call Waiting
Call Waiting
Call Waiting places an incoming call in queue and alerts you with a warning tone. The
[DN] or Line LED flashes at the on-hold rate.
1. If you are talking,
press
...or the flashing
[DN]
or
telephone has the
Auto Hold feature
...or the ringing [DN]
or
...or
2. Press a [DN], then
...or
Direct Station Selection Buttons (Hotline)
This optional feature connects you directly to another station [PDN] by pressing a
Direct Station Selection (DSS) button. If connected to a CO Line, press
the outside party on hold. Transfer the call, as you would normally, by voice
announcing, camping on, hanging up, by pressing
If the station's [PDN], [SDN], [PhDN], or CO Line DSS LED is lit, it could be busy or
in DND mode. If a station is idle but other stations are using all of its [PDNs], the DSS
button also is lit.
52
The call you are on is placed on hold and you are
connected to the waiting call. The [DN] or Line LED
lights steady.
if your
See your System Administrator to find out if you have
Auto Hold.
This disconnects the current call and then connects
you to the transferred call. The [DN] or Line LED
remains steady.
.
The existing call is disconnected. The camped-on line
rings your telephone and the Line LED flashes at the
incoming call rate.
again.
Strata DKT2104-CT Cordless Digital Telephone 5/00
to put
.
Advertisement
Table of Contents
